Products
ECA-100/4
- Amp Type Class D
- Channel Input Mode Switch 2CH/4CH
- Filter Mode Low-Pass or High Pass
- Filter Slope 12dB
EDA-080704S
- 4 in 8 out ,96kHz Sample rate, 300 MHz floating point DSP implementation
- Frequency response: 40Hz-20Kz
- Input/output gain +12dB to -40dB
- Adjustable time delay parameter for each channel (0 ~1000ms) ; combine input and output can tune up delay for 2000ms maximum.
- Adjustable 8 parameter EQs for each input channel
- Adjustable 9 parameter EQs for each output channel
- Each EQ parameter features PEQ , high shelf , low shelf (bandwidth or Q value display)
- Adjustable parameters for each input/output channel: gain ,EQ ,crossover, delay ,compressor, polarity, mixer, mute.
- 3 types crossover filter: Butterworth ,Bessel ,Linkwitz–Riley, in 12 dB, 18dB , 24dB , 48dB slope ,frequency step in 1Hz
- 30 band Graphic EQ in each input channel
- 24 user preset; all preset can be protected with individual password
- Digital compressor & limiter , attack time , release time , compress rate adjustable
- True USB Plug & Play, green software work with Windows 7 & 8, no driver installation required!
- RS 232 port available to be controlled by central controller.
- Support Wi-Fi AP mode for wireless access
- 20 X 4 character LCD display
* This product is proof of concept, for demo purpose.
EDS-01504
- 150W rms, 4ohms.
- Low Pass Crossover.
- All DSP features could be customizedly designed and implemented include adjusting tone for pre-set EQ
EDS-03004
- 300W rms, 4ohms.
- Auto turn-on & stand-by function
- High efficiency, Low cost Class-D power amplifier
- Stand-by power consumption less than 0.5W
- With over current protection & over load protection
- Dual color LED as signal on/stand-by indicator
- All DSP features could be customizedly designed setting
EDS-05004
- 500W rms, 4ohms
- High efficiency ,Low cost Class-D power amplifier
- Compact size with low noise & low distortion
- Universal switching mode power supply built in
- Auto turn-on & stand-by function
- Stand-by power consumption less than 0.5W
- With over load & over current protection
- Dual color LED as signal on/stand-by indicator
EFA-05004
- AC Input Voltage Range 100~240Vac.
- AC Frequency Range 47~63HZ.
- Power Factor Corrector (PFC) >[email protected]/8 Rated Power.
- Standby power consumption less than 0.5W.
EFA-20554,20408,01008
- Switching Mode Power Supply AC Input 100~240Vac.
- On/Off Power Button located on front panel.
- Auto on Function with LED lndicated.
- EMC test passed with whole chassis.
EFA-21254
- Core Chip:CSRA6620
- High performance and combining great sounding class D amplifiers with switch mode power supplies
- ErP and Energy Star compliant standby functionality
- 125W*2CH / 4 ohm Load
- BTL outputs
- THD+N < 0.01% @ 20Hz-20kHz 1/8 rated power
- AC 115V/230(50-60Hz) Selectable
EMA-61508/EMA-120704-2U
- 70 Watt x [email protected](Stereo mode)or 150 Watt x6 Channel
- Auto select power supply AC 120/230V Selectable with over
- AMP OUT Over temperature current protection mode for all channels.